Calmag CalGlow Magnetic and Electrolytic Scale Inhibitor 22mm SI-CALGLOW
This product is the Calmag CalGlow Magnetic and Electrolytic Scale Inhibitor 22mm SI-CALGLOW.
This combined magnetic & electrolytic scale inhibitor is suitable for installation on cold water lines for preventing the formation of limescale. The unit comes complete with 22mm compression fittings and no earth bonding is required.
Any scale that has formed around taps, sinks, showers, etc, will begin softening with regular contact with treated water. This soft scale is easier to remove than normal hard scale. Surfaces frequently in contact with treated water are easier to clean - shower heads are also descaled. After several months of descaling, hot water system efficiency will gradually increase.
Please note: Scale inhibitors are not suitable for eliminating hard scale in kettles. Please check Calmag Water filtration for better water for drinking and cooking. The benefits from the Calcombi are:
How to install the CalGlow 22mm Scale InhibitorTurn off the water supply.Drain relevant pipework or system where the CalGlow unit is to be installed. Allow time for the system to cool down if fitted in line.Cut pipework to suit length of unit.Tighten the compression fittings to make a seal. Re-open the system slowly.Check for leaks.
Main product features:
- Magnetic
- Electrolytic
- Compression
- 22mm
- WRAS approved
Description
This product is the Calmag CalGlow Magnetic and Electrolytic Scale Inhibitor 22mm SI-CALGLOW.
This combined magnetic & electrolytic scale inhibitor is suitable for installation on cold water lines for preventing the formation of limescale. The unit comes complete with 22mm compression fittings and no earth bonding is required.
Any scale that has formed around taps, sinks, showers, etc, will begin softening with regular contact with treated water. This soft scale is easier to remove than normal hard scale. Surfaces frequently in contact with treated water are easier to clean - shower heads are also descaled. After several months of descaling, hot water system efficiency will gradually increase.
Please note: Scale inhibitors are not suitable for eliminating hard scale in kettles. Please check Calmag Water filtration for better water for drinking and cooking. The benefits from the Calcombi are:
How to install the CalGlow 22mm Scale InhibitorTurn off the water supply.Drain relevant pipework or system where the CalGlow unit is to be installed. Allow time for the system to cool down if fitted in line.Cut pipework to suit length of unit.Tighten the compression fittings to make a seal. Re-open the system slowly.Check for leaks.
Main product features:
- Magnetic
- Electrolytic
- Compression
- 22mm
- WRAS approved
Specifications
0.8kg
950mm
2350mm
550mm
Calmag
Scale Inhibitors
Compression & Push Fit Scale Reducers
Compression Scale Reducers
Plated copper
SI-CALGLOW
Magnetic & Electrolytic Inhibitor
Calmag CalGlow
22mm