The SPIN® tools individual 15mm Swaging tool is developed for hard & soft copper. Recommended use with corded or cordless drills that are 1,800 RPM or faster, the SPIN® tools Swaging tools high-temperature swaging method preserves the tubing malleability while performing the swage, preventing cracks and leaks. SPIN® tools Swaging tools allow you to connect tubes with ease and without the use of extra fittings; sleeves and unions, turning potential waste into actual profitProduct Features & Benefits:

• The SPIN® tools individual Swaging tool is developed for hard & soft copper.
• Heat by Friction; Preserves copper’s malleability during the molding process, for a leak-tight fitting.
• SPIN® tools keep the tubing thickness for high pressure refrigerants and is perfect for mini splits and ductless A/C units.
• SPIN® tools are NOT to be used with impact guns or with drills or screwdrivers with hammer or impact mode on. This will result in a swage or flare that does not seal properly

Main product features:

• The SPIN® tools individual Swaging tool is developed for hard & soft copper.
• Heat by Friction; Preserves copper’s malleability during the molding process, for a leak-tight fitting.
• SPIN® tools keep the tubing thickness for high pressure refrigerants and is perfect for mini splits and ductless A/C units.
• SPIN® tools are NOT to be used with impact guns or with drills or screwdrivers with hammer or impact mode on. This will result in a swage or flare that does not seal properly