Branch: Plumb2u - Epsom, Epsom

EHC Comet PV 8kW with 150L Electric Boiler Indirect Pre-Plumbed Cylinder EHCEPV8/150PPC

EHCEPV8/150PPC EHCEPV8/150PPC
EHC Comet PV 8kW with 150L Electric Boiler Indirect Pre-Plumbed Cylinder EHCEPV8/150PPC EHC Comet PV 8kW with 150L Electric Boiler Indirect Pre-Plumbed Cylinder EHCEPV8/150PPC

EHC Comet PV 8kW with 150L Electric Boiler Indirect Pre-Plumbed Cylinder EHCEPV8/150PPC

Product Code: EHCEPV8/150PPC

Comet PV Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 8kw Comet PV Electric Boiler that is configurable from 2kw to 8kw on-site, and 150 litre Pre-Plumbed Indirect Stainless Steel Cylinder which is pre-wired and pre-plumbed.The Electric Heating Company recognise that "Time is Money†and as such developed Electric Boiler & Cylinder Heat Packs that incorporate all the necessary components (with the exception of radiators, radiator valves and pipe-work) for a complete Electric Heating & Hot Water system.EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

What's included:- Choice of Comet PV Boiler- Choice of Indirect Unvented Stainless Steel Cylinder- 2 Port Zone Valve (x2)- Wiring Centre- Dual Cylinder Thermostat- Auto Bypass & Filling Loop- Room Temperature Sensor, Outdoor Temperature- Sensor & DHW Tank Temperature Sensor

Main product features:

  • In-Built Fault Finding Diagnostics
  • Automatic Anti-Legionella Feature
  • Can be used for under floor heating
  • Adjustable Flow Temperature: 20°C - 85°C
Warranty 5-Year Manufacturer's Warranty
Call for price
Starting from
£2,481.17 Pack of 1
/
incl. VAT
RRP £2,481.17
%
- +
Your collection branch is Plumb2u - Epsom, Epsom
Compare

Description

Comet PV Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 8kw Comet PV Electric Boiler that is configurable from 2kw to 8kw on-site, and 150 litre Pre-Plumbed Indirect Stainless Steel Cylinder which is pre-wired and pre-plumbed.The Electric Heating Company recognise that "Time is Money†and as such developed Electric Boiler & Cylinder Heat Packs that incorporate all the necessary components (with the exception of radiators, radiator valves and pipe-work) for a complete Electric Heating & Hot Water system.EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

What's included:- Choice of Comet PV Boiler- Choice of Indirect Unvented Stainless Steel Cylinder- 2 Port Zone Valve (x2)- Wiring Centre- Dual Cylinder Thermostat- Auto Bypass & Filling Loop- Room Temperature Sensor, Outdoor Temperature- Sensor & DHW Tank Temperature Sensor

Main product features:

  • In-Built Fault Finding Diagnostics
  • Automatic Anti-Legionella Feature
  • Can be used for under floor heating
  • Adjustable Flow Temperature: 20°C - 85°C
Lead Time

1-2 WORKING DAYS

Weight

20.5kg

Height

710mm

Width

310mm

Length

230mm

Brand

EHC

Categories

Electric Boilers

Category

Electric Flow Boilers

Delivery Method

Direct from supplier

MPN

EHCEPV8/150PPC

Product Type

Electric Boiler

Range

Comet PV

Description

Comet PV Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 8kw Comet PV Electric Boiler that is configurable from 2kw to 8kw on-site, and 150 litre Pre-Plumbed Indirect Stainless Steel Cylinder which is pre-wired and pre-plumbed.The Electric Heating Company recognise that "Time is Money†and as such developed Electric Boiler & Cylinder Heat Packs that incorporate all the necessary components (with the exception of radiators, radiator valves and pipe-work) for a complete Electric Heating & Hot Water system.EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

What's included:- Choice of Comet PV Boiler- Choice of Indirect Unvented Stainless Steel Cylinder- 2 Port Zone Valve (x2)- Wiring Centre- Dual Cylinder Thermostat- Auto Bypass & Filling Loop- Room Temperature Sensor, Outdoor Temperature- Sensor & DHW Tank Temperature Sensor

Main product features:

  • In-Built Fault Finding Diagnostics
  • Automatic Anti-Legionella Feature
  • Can be used for under floor heating
  • Adjustable Flow Temperature: 20°C - 85°C
Lead Time

1-2 WORKING DAYS

Weight

20.5kg

Height

710mm

Width

310mm

Length

230mm

Brand

EHC

Categories

Electric Boilers

Category

Electric Flow Boilers

Delivery Method

Direct from supplier

MPN

EHCEPV8/150PPC

Product Type

Electric Boiler

Range

Comet PV

SEARCH ×

Search