Branch: Plumb2u - Epsom, Epsom

EHC SlimJim 12kW Flow Boiler with 150L Indirect Pre-Plumb Cylinder EHCSJ12/150PPC

EHCSJ12/150PPC

EHC SlimJim 12kW Flow Boiler with 150L Indirect Pre-Plumb Cylinder EHCSJ12/150PPC

Product Code: EHCSJ12/150PPC

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work for the Cylinder installation. This value-for-money package includes a 10kw SlimJim Electric Boiler and 150 litre Pre-Plumbed Indirect Stainless Steel Cylinder which is pre-wired and pre-plumbed and includes the 24/7 Programmer & Thermostat.The Electric Heating Company recognise that "Time is Money†and as such developed Electric Boiler & Cylinder Heat Packs that incorporate all the necessary components (with the exception of radiators, radiator valves and pipe-work) for a complete Electric Heating & Hot Water system.EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of SlimJim Electric Flow Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

What's included:- Choice of SlimJim Boiler- Choice of Indirect Unvented Stainless Steel Cylinder- Twin Channel Programmer Room Thermostat- 8 Litre Robo Kit- Auto Air Vent- High Quality ErP Smart Pump- Lockshield Valves- Automatic By-Pass- 2 Port Zone Valve (x2)- Wiring Centre- Dual Cylinder Thermostat

Main product features:

  • 5 years Boiler Warranty *T&C’s Apply
  • 25 years Cylinder Warranty *T&C’s Apply
  • Cylinder Dimensions: 150L 1120x550mm
  • In-Built Fault Finding Diagnostics
Warranty 5-Year Manufacturer's Warranty
Call for price
Starting from
£2,343.25 Pack of 1
/
incl. VAT
RRP £2,343.25
%
- +
Your collection branch is Plumb2u - Epsom, Epsom
Compare

Description

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work for the Cylinder installation. This value-for-money package includes a 10kw SlimJim Electric Boiler and 150 litre Pre-Plumbed Indirect Stainless Steel Cylinder which is pre-wired and pre-plumbed and includes the 24/7 Programmer & Thermostat.The Electric Heating Company recognise that "Time is Money†and as such developed Electric Boiler & Cylinder Heat Packs that incorporate all the necessary components (with the exception of radiators, radiator valves and pipe-work) for a complete Electric Heating & Hot Water system.EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of SlimJim Electric Flow Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

What's included:- Choice of SlimJim Boiler- Choice of Indirect Unvented Stainless Steel Cylinder- Twin Channel Programmer Room Thermostat- 8 Litre Robo Kit- Auto Air Vent- High Quality ErP Smart Pump- Lockshield Valves- Automatic By-Pass- 2 Port Zone Valve (x2)- Wiring Centre- Dual Cylinder Thermostat

Main product features:

  • 5 years Boiler Warranty *T&C’s Apply
  • 25 years Cylinder Warranty *T&C’s Apply
  • Cylinder Dimensions: 150L 1120x550mm
  • In-Built Fault Finding Diagnostics
Lead Time

1-2 WORKING DAYS

Weight

11kg

Height

910mm

Width

200mm

Length

170mm

Boiler Type

Flow

Brand

EHC

Categories

Electric Boilers

Category

Electric Flow Boilers

Delivery Method

Direct from supplier

Fuel Type

Electric

Heat Output (kW)

12kW

MPN

EHCSJ12/150PPC

Product Type

Flow Electric Boiler

Range

SlimJim

Description

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work for the Cylinder installation. This value-for-money package includes a 10kw SlimJim Electric Boiler and 150 litre Pre-Plumbed Indirect Stainless Steel Cylinder which is pre-wired and pre-plumbed and includes the 24/7 Programmer & Thermostat.The Electric Heating Company recognise that "Time is Money†and as such developed Electric Boiler & Cylinder Heat Packs that incorporate all the necessary components (with the exception of radiators, radiator valves and pipe-work) for a complete Electric Heating & Hot Water system.EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of SlimJim Electric Flow Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

What's included:- Choice of SlimJim Boiler- Choice of Indirect Unvented Stainless Steel Cylinder- Twin Channel Programmer Room Thermostat- 8 Litre Robo Kit- Auto Air Vent- High Quality ErP Smart Pump- Lockshield Valves- Automatic By-Pass- 2 Port Zone Valve (x2)- Wiring Centre- Dual Cylinder Thermostat

Main product features:

  • 5 years Boiler Warranty *T&C’s Apply
  • 25 years Cylinder Warranty *T&C’s Apply
  • Cylinder Dimensions: 150L 1120x550mm
  • In-Built Fault Finding Diagnostics
Lead Time

1-2 WORKING DAYS

Weight

11kg

Height

910mm

Width

200mm

Length

170mm

Boiler Type

Flow

Brand

EHC

Categories

Electric Boilers

Category

Electric Flow Boilers

Delivery Method

Direct from supplier

Fuel Type

Electric

Heat Output (kW)

12kW

MPN

EHCSJ12/150PPC

Product Type

Flow Electric Boiler

Range

SlimJim

SEARCH ×

Search