Branch: Plumb2u - Epsom, Epsom

EHC SlimJim 14.4kW Flow Boiler with 200L Indirect Cylinder EHCSJ15/200IND

EHCSJ15/200IND

EHC SlimJim 14.4kW Flow Boiler with 200L Indirect Cylinder EHCSJ15/200IND

Product Code: EHCSJ15/200IND

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 14.4kW SlimJim Electric Boiler and an 200L Indirect Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 200L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.Our single phase Electric Flow Boiler outputs are 10kW, 12kW with the 14.4kW available for properties that require larger outputs.The SlimJim Electric Flow Boiler also has an easy-fit front cover for future maintenance purposes. It has a user-friendly front Control Panel incorporating an easy-to-use temperature control dial, heat and fault diagnostic indicators for the user and installer.The unique Run-Dry Water Level Sensor incorporated within the SlimJim Boiler protects the heat exchanger from running dry due to system water loss. The Stainless Steel Heat Exchanger is fully insulated to minimise energy heatloss.The Boiler temperature range can be set between 30 degrees and 80 degrees which also makes it a suitable choice for wet central heating radiators and underfloor heating systems.Safety is of paramount importance and as such the Boiler incorporates a unique high current safety cut-out device to protect the Boiler against overheating.The SlimJim can be supplied as a standalone unit or complete with a choice of Boiler Packs for Heating only or Heating and Domestic Hot Water Installations.

What's included:- Choice of SlimJim Boiler- Choice of Indirect Unvented Stainless Steel Cylinder- Single Channel Programmer- Room Thermostat- 8 Litre Robo Kit- Auto Air Vent- High Quality ErP Smart Pump- Lockshield Valves- Automatic By-Pass- 2 Port Zone Valve (x2)- Wiring Centre- Dual Cylinder Thermostat

Main product features:

  • 5 years Boiler Warranty *T&C’s Apply
  • 25 years Cylinder Warranty *T&C’s Apply
  • Cylinder Dimensions: 200L 1496x550mm
  • In-Built Fault Finding Diagnostics
Warranty 5-Year Manufacturer's Warranty
Call for price
Starting from
£2,210.69 Pack of 1
/
incl. VAT
RRP £2,210.69
%
- +
Your collection branch is Plumb2u - Epsom, Epsom
Compare

Description

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 14.4kW SlimJim Electric Boiler and an 200L Indirect Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 200L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.Our single phase Electric Flow Boiler outputs are 10kW, 12kW with the 14.4kW available for properties that require larger outputs.The SlimJim Electric Flow Boiler also has an easy-fit front cover for future maintenance purposes. It has a user-friendly front Control Panel incorporating an easy-to-use temperature control dial, heat and fault diagnostic indicators for the user and installer.The unique Run-Dry Water Level Sensor incorporated within the SlimJim Boiler protects the heat exchanger from running dry due to system water loss. The Stainless Steel Heat Exchanger is fully insulated to minimise energy heatloss.The Boiler temperature range can be set between 30 degrees and 80 degrees which also makes it a suitable choice for wet central heating radiators and underfloor heating systems.Safety is of paramount importance and as such the Boiler incorporates a unique high current safety cut-out device to protect the Boiler against overheating.The SlimJim can be supplied as a standalone unit or complete with a choice of Boiler Packs for Heating only or Heating and Domestic Hot Water Installations.

What's included:- Choice of SlimJim Boiler- Choice of Indirect Unvented Stainless Steel Cylinder- Single Channel Programmer- Room Thermostat- 8 Litre Robo Kit- Auto Air Vent- High Quality ErP Smart Pump- Lockshield Valves- Automatic By-Pass- 2 Port Zone Valve (x2)- Wiring Centre- Dual Cylinder Thermostat

Main product features:

  • 5 years Boiler Warranty *T&C’s Apply
  • 25 years Cylinder Warranty *T&C’s Apply
  • Cylinder Dimensions: 200L 1496x550mm
  • In-Built Fault Finding Diagnostics
Lead Time

1-2 WORKING DAYS

Weight

11kg

Height

910mm

Width

200mm

Length

170mm

Boiler Type

Flow

Brand

EHC

Categories

Electric Boilers

Category

Electric Flow Boilers

Delivery Method

Direct from supplier

Fuel Type

Electric

Heat Output (kW)

14.4KW

MPN

EHCSJ15/200IND

Product Type

Flow Electric Boiler

Range

SlimJim

Description

SlimJim Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 14.4kW SlimJim Electric Boiler and an 200L Indirect Stainless Steel Cylinder complete with a Boiler Pack designed for Heating and Domestic Hot Water installations.SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 200L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.Our single phase Electric Flow Boiler outputs are 10kW, 12kW with the 14.4kW available for properties that require larger outputs.The SlimJim Electric Flow Boiler also has an easy-fit front cover for future maintenance purposes. It has a user-friendly front Control Panel incorporating an easy-to-use temperature control dial, heat and fault diagnostic indicators for the user and installer.The unique Run-Dry Water Level Sensor incorporated within the SlimJim Boiler protects the heat exchanger from running dry due to system water loss. The Stainless Steel Heat Exchanger is fully insulated to minimise energy heatloss.The Boiler temperature range can be set between 30 degrees and 80 degrees which also makes it a suitable choice for wet central heating radiators and underfloor heating systems.Safety is of paramount importance and as such the Boiler incorporates a unique high current safety cut-out device to protect the Boiler against overheating.The SlimJim can be supplied as a standalone unit or complete with a choice of Boiler Packs for Heating only or Heating and Domestic Hot Water Installations.

What's included:- Choice of SlimJim Boiler- Choice of Indirect Unvented Stainless Steel Cylinder- Single Channel Programmer- Room Thermostat- 8 Litre Robo Kit- Auto Air Vent- High Quality ErP Smart Pump- Lockshield Valves- Automatic By-Pass- 2 Port Zone Valve (x2)- Wiring Centre- Dual Cylinder Thermostat

Main product features:

  • 5 years Boiler Warranty *T&C’s Apply
  • 25 years Cylinder Warranty *T&C’s Apply
  • Cylinder Dimensions: 200L 1496x550mm
  • In-Built Fault Finding Diagnostics
Lead Time

1-2 WORKING DAYS

Weight

11kg

Height

910mm

Width

200mm

Length

170mm

Boiler Type

Flow

Brand

EHC

Categories

Electric Boilers

Category

Electric Flow Boilers

Delivery Method

Direct from supplier

Fuel Type

Electric

Heat Output (kW)

14.4KW

MPN

EHCSJ15/200IND

Product Type

Flow Electric Boiler

Range

SlimJim

SEARCH ×

Search