Branch: Plumb2u - Epsom, Epsom
0 £0.00
products in your basketto quote To basket
Ooops no items were found.
Try something else.
Ok
Loading…
0
Knipex

Knipex Plastic Conduit Pipe / Hose Cutter 25mm Diameter 90 20 185

Category Plastic Pipe Cutters
90 20 185 90 20 185
Knipex Plastic Conduit Pipe / Hose Cutter 25mm Diameter 90 20 185 Knipex Plastic Conduit Pipe / Hose Cutter 25mm Diameter 90 20 185
Knipex Plastic Conduit Pipe / Hose Cutter 25mm Diameter 90 20 185 Knipex Plastic Conduit Pipe / Hose Cutter 25mm Diameter 90 20 185
Knipex Plastic Conduit Pipe / Hose Cutter 25mm Diameter 90 20 185 Knipex Plastic Conduit Pipe / Hose Cutter 25mm Diameter 90 20 185
Knipex

Knipex Plastic Conduit Pipe / Hose Cutter 25mm Diameter 90 20 185

Product Code: 90 20 185

  • For cutting thin-walled plastic pipe (such as plastic protective outer pipe) and plastic and rubber hose, including fabric-reinforced, up to 25 mm outer diameter
  • Exchangeable blade
  • With opening spring and locking device
  • Ergonomically shaped handles made of glass fibre reinforced plastic
  • Not suitable for cutting cables- Cutting capacities (diameter): Ø 25mm- Cutting edge length mm: Ø 25mmFor plastic pipes, plastic armoured pipes and hoses (also fabric reinforced)Trapezoidal blade cuts two cut edges simultaneously:Thanks to the trapezoidal shape, the blade firstly cuts wedge-shaped into the material. The manual force initially acts on the tip of the blade and, during the cutting process, follows the shape of the material in a circular (radial) way from the inside out and onto the material. This prevents distortions as can arise when cutting using a conventional shearing action with two straight cutting edges. The trapezoidal shape has other benefits:Right-angled, clean cuts - with little physical effort:Due to the exact positioning of the material in the hose and protective pipe cutter and the wedge-shaped blade, the Knipex 90 20 185 pipe cutter automatically produces right-angled cuts. After cutting, no finishing (e.g. deburring) is required on the cut edges. Whether cutting plastic armoured pipes or fabric-reinforced hoses - e.g. for compressed air: the effort required is low due to the favourable angle of entry of the blade. Little effort is needed because the material has already been cut into.Fast, convenient work thanks to opening spring, positioning and fastening:The opening spring assumes the work of opening for the user during each cutting operation. The spring presses the handles apart and opens the shears while reducing manual force. This is a great advantage, especially during large projects with several work processes. A pawl is integrated for transport. The material to be cut is positioned and secured in the wide, half round support. The pipe cutter for hoses and protective pipes ensure the right-angled position of the material to the blade. This enables cuts to be made in quick sequence using the pipe cutter for hoses and protective pipes

    • Main product features:

    • For cutting thin walled plastic pipes (conduit plastic pipes) and flexible hoses, also with fabric reinforcement, of plastic and rubber up to Ø 25 mm / 1"
    • Not suitable for cutting cables
    • With opening spring and locking device
    Category Plastic Pipe Cutters
    Warranty 2-Year Manufacturer's Warranty

    Data Sheet
    Call for price
    Starting from
    £44.03 Pack of 1
    /
    incl. VAT
    RRP £44.03
    %
    - +
    Check stock in other branches
    Your collection branch is Plumb2u - Epsom, Epsom
    Add to quick list
    Compare

    Description

  • For cutting thin-walled plastic pipe (such as plastic protective outer pipe) and plastic and rubber hose, including fabric-reinforced, up to 25 mm outer diameter
  • Exchangeable blade
  • With opening spring and locking device
  • Ergonomically shaped handles made of glass fibre reinforced plastic
  • Not suitable for cutting cables- Cutting capacities (diameter): Ø 25mm- Cutting edge length mm: Ø 25mmFor plastic pipes, plastic armoured pipes and hoses (also fabric reinforced)Trapezoidal blade cuts two cut edges simultaneously:Thanks to the trapezoidal shape, the blade firstly cuts wedge-shaped into the material. The manual force initially acts on the tip of the blade and, during the cutting process, follows the shape of the material in a circular (radial) way from the inside out and onto the material. This prevents distortions as can arise when cutting using a conventional shearing action with two straight cutting edges. The trapezoidal shape has other benefits:Right-angled, clean cuts - with little physical effort:Due to the exact positioning of the material in the hose and protective pipe cutter and the wedge-shaped blade, the Knipex 90 20 185 pipe cutter automatically produces right-angled cuts. After cutting, no finishing (e.g. deburring) is required on the cut edges. Whether cutting plastic armoured pipes or fabric-reinforced hoses - e.g. for compressed air: the effort required is low due to the favourable angle of entry of the blade. Little effort is needed because the material has already been cut into.Fast, convenient work thanks to opening spring, positioning and fastening:The opening spring assumes the work of opening for the user during each cutting operation. The spring presses the handles apart and opens the shears while reducing manual force. This is a great advantage, especially during large projects with several work processes. A pawl is integrated for transport. The material to be cut is positioned and secured in the wide, half round support. The pipe cutter for hoses and protective pipes ensure the right-angled position of the material to the blade. This enables cuts to be made in quick sequence using the pipe cutter for hoses and protective pipes

    • Main product features:

    • For cutting thin walled plastic pipes (conduit plastic pipes) and flexible hoses, also with fabric reinforcement, of plastic and rubber up to Ø 25 mm / 1"
    • Not suitable for cutting cables
    • With opening spring and locking device
    Weight

    0.07kg

    Height

    250mm

    Width

    700mm

    Length

    2150mm

    Brand

    Knipex

    Categories

    Cutting Tools

    Category

    Plastic Pipe Cutters

    MPN

    90 20 185

    Product Type

    Plastic Pipe Cutter

    Description

  • For cutting thin-walled plastic pipe (such as plastic protective outer pipe) and plastic and rubber hose, including fabric-reinforced, up to 25 mm outer diameter
  • Exchangeable blade
  • With opening spring and locking device
  • Ergonomically shaped handles made of glass fibre reinforced plastic
  • Not suitable for cutting cables- Cutting capacities (diameter): Ø 25mm- Cutting edge length mm: Ø 25mmFor plastic pipes, plastic armoured pipes and hoses (also fabric reinforced)Trapezoidal blade cuts two cut edges simultaneously:Thanks to the trapezoidal shape, the blade firstly cuts wedge-shaped into the material. The manual force initially acts on the tip of the blade and, during the cutting process, follows the shape of the material in a circular (radial) way from the inside out and onto the material. This prevents distortions as can arise when cutting using a conventional shearing action with two straight cutting edges. The trapezoidal shape has other benefits:Right-angled, clean cuts - with little physical effort:Due to the exact positioning of the material in the hose and protective pipe cutter and the wedge-shaped blade, the Knipex 90 20 185 pipe cutter automatically produces right-angled cuts. After cutting, no finishing (e.g. deburring) is required on the cut edges. Whether cutting plastic armoured pipes or fabric-reinforced hoses - e.g. for compressed air: the effort required is low due to the favourable angle of entry of the blade. Little effort is needed because the material has already been cut into.Fast, convenient work thanks to opening spring, positioning and fastening:The opening spring assumes the work of opening for the user during each cutting operation. The spring presses the handles apart and opens the shears while reducing manual force. This is a great advantage, especially during large projects with several work processes. A pawl is integrated for transport. The material to be cut is positioned and secured in the wide, half round support. The pipe cutter for hoses and protective pipes ensure the right-angled position of the material to the blade. This enables cuts to be made in quick sequence using the pipe cutter for hoses and protective pipes

    • Main product features:

    • For cutting thin walled plastic pipes (conduit plastic pipes) and flexible hoses, also with fabric reinforcement, of plastic and rubber up to Ø 25 mm / 1"
    • Not suitable for cutting cables
    • With opening spring and locking device
    Weight

    0.07kg

    Height

    250mm

    Width

    700mm

    Length

    2150mm

    Brand

    Knipex

    Categories

    Cutting Tools

    Category

    Plastic Pipe Cutters

    MPN

    90 20 185

    Product Type

    Plastic Pipe Cutter

    SEARCH ×

    Search